InterNACHI Plumbing Practice Exam

Browse all practice questions for the InterNACHI Plumbing Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Start practice testFlash cards
Ace the InterNACHI Plumbing Challenge 2026 – Dive Into Success with Confidence! course image
How the Shape of a Cleanout Affects Plug RemovalThe square shape of a cleanout ________ the possibility of stripping the plug during removal.How Wide Should a Shower Entry Be for Accessibility?What should the width of a shower entry be to ensure accessibility?Learn why storm water should never go into sewersDrainage of storm water, rainwater, or groundwater should not be directed into which of the following?Tailpieces: The Short Pipe Directly Attached to a Fixture in PlumbingWhat are short lengths of pipe attached directly to a fixture called?The Rise and Fall of Polybutylene in Plumbing SystemsWhich plumbing material is known to have been widely used before newer regulations discouraged its use?Understanding How Plumbing System Age Affects Water QualityWhich of the following can affect a home's water supply quality?Understanding the Best Method for Preventing Backflow in PlumbingWhat is considered the most effective and dependable method of preventing backflow?Understanding the Ideal Space in Front of a LavatoryHow much space should be in front of a lavatory in relation to a wall, fixture or door?Understanding the Importance of Air Gaps in Plumbing SystemsThe unobstructed vertical distance through the free atmosphere between an outlet and the rim best defines what?Understanding the Importance of Proper Vent Pipe HeightHow high should the vent pipe that passes through the roof terminate above the roof line?Understanding the Importance of Reporting Leaky Faucets During Plumbing InspectionsIs it necessary to report on leaky faucets during a plumbing inspection?Understanding the Importance of Type K Copper Tubing in PlumbingType K copper tubing is the ________ and typically used for underground water service.Understanding the Importance of Using a Check Valve in Your Sump PumpThe discharge pipe on a sump pump should have a _________ installed to prevent previously pumped discharge from returning to the pump.Understanding the Importance of Vent Pipes Above the SnowlineWhy is it important for the vent pipe to be above the snowline?Understanding the Importance of Vent Pipes in Plumbing SystemsHow many vent pipes should extend to the outdoor air for a dwelling?Understanding the Key Factors Influencing Plumbing Drainage SystemsWhat factor influences the effectiveness of plumbing drainage systems?Understanding the Minimum Liquid Seal Height Required for Fixture TrapsWhat is the minimum liquid seal height required for fixture traps?Understanding the Role of Elbow Fittings in Plumbing SystemsWhat fitting is used to connect different plumbing sections to allow for changes in direction?Understanding What Plumbing Systems Should Avoid Drum TrapsWhat should not be connected to plumbing systems that do not allow drainage?What fire-safe chemicals are used in plastic bathtubs to prevent ignition?What type of chemicals are used in the construction of plastic bathtubs to ensure fire safety?What Should Inspectors Do When Plumbing Systems Show Signs of Wear?When a plumbing system shows signs of wear, what should inspectors do?What temperature defines hot water?Hot water is defined as water at what temperature or higher?What You Need to Know About Backflow in Plumbing SystemsIn plumbing terminology, what does the term 'backflow' refer to?What’s the Ideal Height for Well Casing Above Ground?How many inches should a well casing extend above the ground surface?When's the Best Time to Check Water Pressure in Your Home?At which point in a dwelling is it best to observe water pressure at fixtures?
More practice questions

These questions are part of the practice quiz. Start practicing

  • Is evaluating water softeners and purifiers part of a typical home inspection?
  • How should functional water flow be evaluated?
  • What is required when a water heater is installed in an attic?
  • Why should inspectors pay special attention to the grade surrounding a foundation?
  • A plumbing inspection should always include which of the following actions regarding faucets?
  • Where should the TPR discharge pipe be directed?
  • This course addresses which aspects of plumbing?
  • Why is evaluating water softeners significant during an inspection?
  • In plumbing practices, what is the purpose of a water closet?
  • Should the plumbing inspection report include the types of supply piping inspected?
  • True or False: All visible wastes, drains, and vents must be inspected by inspectors.
  • What type of damper is only to be used with a solid fuel-burning appliance?
  • What is another term for a bathroom or washroom sink?
  • To which condition is safety glazing required for exterior windows?
  • What is the minimum diameter of a water service pipe?
  • Toilets generally have what type of plumbing feature?
  • At what temperature must TPR valves be set to discharge at most?
  • What material should hangers and strapping be made of?
  • What is the required minimum height for vent pipes that pass through a roof?
  • Which of the following is NOT an acceptable installation for vent pipes according to plumbing codes?
  • In plumbing standards, a toilet or commode is referred to as a what?
  • Which condition is vital for a plumbing vent to keep trap seals intact?
  • What is the common term for a lavatory?
  • What is the purpose of a lavatory in a home?
  • Particular drainage fittings have been designed with patterns providing ________ resistance to flow.
  • How far should a plumbing DWV vent termination be horizontally away from a door or window?
  • If a pump at a whirlpool bathtub is located more than 2 feet from the access opening, what is the minimum size opening that should be installed?
  • Which valve is primarily used to control water flow in a plumbing system?
  • What component is critical in preventing siphonage in plumbing systems?
  • What does the term 'venting' primarily refer to in plumbing?
  • Obstructions, such as rocks or blocks, at any point inside a trench ________ provide adequate support for drainage piping.
  • Is a cleanout required for every change in direction of the sewer drainage pipe?
  • How far must the building drain extend beyond the exterior building walls?
  • What action should inspectors avoid during a plumbing inspection?
  • Are sump pumps included in the standard items for a home inspection?
  • What is a common use of a vent stack in a plumbing system?
  • Is it ever permitted to discharge untreated sewage or wastewater on the ground surface?
  • Is a relief-valve pipe terminating into a water leak catch pan permitted?
  • What is the minimum height above the tub floor surface for an exterior window to not require safety glazing?
  • A _______ is required for most changes in direction of the sewer drainage pipe.
  • The term describing the reverse flow of liquids in a plumbing system is known as?
  • Must an inspector examine a home for polybutylene plumbing?
  • Is a shut-off switch or disconnect required for all electric water heaters?
  • Which type of traps is not permitted in plumbing?
  • How deep is a well categorized as a deep well?
  • What is the primary purpose of a sediment trap in plumbing systems?
  • Which material is no longer permitted for laundry trays due to sanitary concerns?
  • What temperature is considered safe for water in bathtubs by regulations?
  • What factor is critical for the installation of vent pipes?
  • What is a potential consequence of not using an air gap in plumbing systems?
  • In what space designation is the volume of space not greater than 50 cubic feet per 1,000 BTU/h of appliance input rating classified?
  • How should an access opening for a whirlpool bathtub be sized if the pump is more than 2 feet away?
  • Is it true that rocks or blocks can support drainage piping inside a trench?
  • Closet bolts are often made of which material due to its corrosion resistance?
  • What is the acceptable installation practice for gas vent pipes?
  • A cleanout plug or removable trap section should be installed on traps located below which of the following?
  • Is solvent-cementing between ABS and PVC pipe allowed?
  • If a standpipe is used for an automatic clothes washer, what should be the minimum diameter of the standpipe and its trap?
  • Why is solvent-cementing joints between different types of plastic not allowed?
  • Dwellings built far above street-level may have what type of water pressure and water flow?
  • What should the installation of supply lines and fittings for all fixtures prevent?
  • Are inspectors required to operate all plumbing and fuel shut-off valves during an inspection?
  • The DWV system of the dwelling should be tested with a minimum _______ head of water for ______.
  • The horizontal spacing for supporting pipe made of cast iron should be a maximum of _____ feet.
  • From which areas may fuel-fired water heaters NOT obtain combustion air?
  • What is the minimum width required for a shower opening to be considered compliant?
  • What does a check valve do in a plumbing system?
  • Gas vent pipes must terminate at least how high above roof pitches up to 6/12?
  • Determining the location of the main water supply shut-off valve is considered?
  • What is required for the method of construction that allows drainage flow in plumbing?
  • If mechanical drain stoppers are missing or not working properly, how should inspectors report them?
  • An anchoring ring that is secured to the floor is known as what?
  • What is the maximum horizontal spacing for PVC drainage pipe?
  • True or False: Inspectors are required to guarantee that shower pans and bath wastes are free of leaks.
  • Can contamination impact the potability of water?
  • Which organization controls the quality requirements for water to be classified as potable in the U.S.?
  • Glass doors enclosing the shower must be made of what type of glazing?
  • Where should a sediment trap be installed in relation to the equipment's shut-off valve?
  • What is a common characteristic of soft brass in plumbing?
  • Access should be provided to which type of valves in plumbing?
  • What is the lowest pipe in a drainage system called?
  • What type of valve is required to prevent backflow in systems like sump pumps?
  • How many inches should casings for private wells extend above the ground surface?
  • What is the minimum height above the trap for a standpipe, such as that used for a clothes washer?
  • What is the minimum drop in grade required within the first 10 feet to ensure proper drainage away from foundation walls?
  • What is the maximum height of the liquid seal in fixture traps, except for specially-designed fixtures?
  • What do air-admittance valves protect traps from?
  • What is the minimum slope of a horizontal drainpipe that is sized between 3 and 6 inches?
  • How high should the termination for gas vent pipes be for roofs with a pitch of up to 6:12?
  • What does not fall under the scope of plumbing inspections according to standard practices?
  • What is the minimum height for a clothes washer standpipe above the trap?
  • At what maximum temperature should a temperature pressure-relief (TPR) valve discharge?
  • The waste from an automatic clothes washer must discharge its water through what type of device?
  • What is a critical factor in the placement of gas vent pipes?
  • What does ABS stand for in plumbing terminology?
  • What role does the TPR discharge pipe serve in relation to a water heater?
  • At what temperature, in degrees Fahrenheit, is the maximum water temperature typically limited to by a water temperature limiting device?
  • Is a shut-off valve the same as a full-open valve?
  • Which type of copper tubing is generally considered to be the strongest and most durable?
  • What feature is essential for a cleanout in plumbing systems?
  • What should be the size of a vent pipe relative to the diameter of the drain it serves?
  • What is the main focus of a plumbing inspection?
  • Where should the TPR discharge pipe discharge through?
  • What is the minimum diameter typically required for a water service pipe?
  • Is an inspector required to light pilot lights during an inspection?
  • What inessential characteristics of laundry trays are not allowed in construction?
  • A shutoff valve is _______ a full-open valve.
  • Which of the following is essential to maintain in a residential plumbing system?
  • What is the maximum aggregate capacity of oil storage tanks to be permitted for a cross-connection?
  • What must inspectors determine regarding main water and fuel shut-off valves?
  • What is required for every trap and trap fixture in plumbing systems?
  • What should be done if a manual damper is found in a gas appliance setup?
  • Which type of traps are NOT permitted as they impede drainage flow?
  • According to standards, how should plumbing pipes be positioned relative to one another?
  • What can happen to old tailpieces and traps made of soft brass with chrome or nickel-plating?
  • What is the maximum total aggregate capacity of oil storage tanks allowed for cross-connection?
  • When inspecting toilets, what should inspectors check for?
  • How can a plumbing system ensure proper drainage?
  • The joint between different types of plastic made with solvent cement will not be reliable because the chemical composition of the joint will not ____________.
  • Which component should be included in the installation of a sump pump to ensure functionality?
  • What should any vent terminal be positioned in relation to an opening?
  • What type of vent pipes should have protection against freezing?
  • Which strategy can be employed to prevent water hammer in plumbing systems?
  • What does venting protect the trap seals from, besides positive pressures?
  • What device is used to relieve excessive pressure within a water heater?
  • What is a water closet commonly referred to as in plumbing standards?
  • When two or more vent connectors enter a common gas vent, which connector should enter at the highest level?
  • What is the minimum interior cross-sectional area required for a shower compartment?
  • What type of plumbing concern is polybutylene considered to be?
  • What is the maximum horizontal spacing for supporting cast-iron pipe?
  • According to InterNACHI Standards, what are inspectors required to do with all toilets?
  • What is a potential risk when using improper fittings in drainage systems?
  • What is the minimum clear and unobstructed finish-width for an access and egress opening for a shower?
  • What should inspectors verify about faucets in a plumbing inspection?
  • What is typically required for a shower installation in terms of space?
  • Which type of vent connector configuration is generally more efficient for gas appliances?
  • The sump pit should not be less than ____ inches in diameter and ____ inches deep.
  • What is required to be installed on a sump pump's discharge pipe to prevent backflow?
  • Inspectors are not required to determine the existence of _______________ plumbing in a home.
  • Acrylonitrile butadiene styrene is commonly abbreviated as?
  • What is the minimum slope required for a horizontal drain pipe sized between 3 and 6 inches?
  • Must the inspector determine the potability of the water supply?
  • Where do gases escape in a sanitary drainage system?
  • What does the term "plumbing" derive from in Latin?
  • What is required when a water heater is installed in an attic?
  • How should an access opening for mechanical equipment, such as a water heater, be designed?
  • True or False: Many old tailpieces and traps are made of durable materials.
  • Cleanouts for drainage pipes should be installed _____________ apart in horizontal drainage lines measured from the upstream entrance of the cleanout.
  • The design of a drainage system is based on _____ flow in the drainage piping.
  • What should be protected against freezing in cold climates?
  • If a home inspector sees a fuel storage tank, how should it be treated in the report?
  • Should inspectors identify whether the water supply to a property is public or private?
  • The _______ connector should enter at the highest level where two or more vent connectors enter a common gas vent, chimney flue, or single-wall metal pipe.
  • The U.S. EPA's Office of Drinking Water controls the quality of water classified as what?
  • A relief-valve pipe terminating into a water leak catch pan is not permitted because the pan is not __________.
  • True or False: Inspectors should flush all toilets as part of their inspection process.
  • What type of window must be of safety glazing if the bottom exposed edge is less than 60 inches from the tub/shower floor?
  • What material are old tailpieces and traps often made of that can easily break with a gentle touch?
  • For safety measures, what type of window should be used in wet areas such as bathrooms?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy